Netgear XCM8806 Chassis Hardware Installation Guide - Page 48

NETGEAR 8800 Chassis Switch CLI Manual On the NETGEAR 8800 series switches, if your default BootROM image becomes corrupted, you can force the MSM to boot from an alternate BootROM image by inserting a sharp object into the "A" and "R" holes on the MSM and applying slight pressure. Refer to the hardware documentation for information on the MSM. The reboot MSM option on the 8800 series switches affects the entire module. Example The following command reboots the switch at 8:00 AM on April 15, 2005: reboot time 04 15 2005 08 00 00 show accounts show accounts Description Displays user account information for all users on the switch. Syntax Description This command has no arguments or variables. Default N/A. Usage Guidelines You need to create a user account using the create account command before you can display user account information. To view the accounts that have been created, you must have administrator privileges. The show accounts command displays the following information in a tabular format: • User Name-The name of the user. This list displays all of the users who have access to the switch. • Access-This may be listed as R/W for read/write or RO for read only. • Login OK-The number of logins that are okay. • Failed-The number of failed logins. • Accounts locked out-Account configured to be locked out after 3 consecutive failed login attempts (using the configure account password-policy lockout-on-login-failures command). Note: This command does not show the failsafe account. 48 | Chapter 2. Commands for Accessing the Switch