Netgear XCM8806 Chassis Hardware Installation Guide - Page 153

NETGEAR 8800 Chassis Switch CLI Manual Example The following command downloads the configuration file named XOS1.cfg from the TFTP server with an IP address of 10.123.45.67: tftp 10.123.45.67 -v "VR-Default" -g -r XOS1.cfg The following command uploads the configuration file named XOS2.cfg to the TFTP server with an IP address of 10.123.45.67: tftp 10.123.45.67 -v "VR-Default" -p -r XOS2.cfg The following command retrieves and transfers files from an external memory card: tftp 10.1.2.3. -g -l memorycard test.pol -r august23.pol tftp get tftp get [ | ] {-vr } [{[internal-memory | memorycard | } {} | {} {[internal-memory | memorycard | ]}] {force-overwrite} Description Allows you to use TFTP from the current command line interface session to copy the file from a TFTP server and copy it to a local host, including the switch, internal memory card, or external compact flash card. Syntax Description host-name ip-address vr_name internal-memory local-file-internal memorycard local-file-memcard local_file remote_file force-overwrite Specifies the name of the remote host. Specifies the IP address of the TFTP server. Specifies the name of the virtual router. Note: User-created VRs are supported only on the platforms listed for this feature in Appendix A of the NETGEAR 8800 User Manual. Specifies the internal memory card. Specifies the name of the core dump file located on the internal memory card. Specifies the removable external compact flash card. Specifies the name of the file on the external compact flash card. Specifies the name of the file (configuration file, policy file) on the local host. Specifies the name of the file on the remote host. Specifies the switch to automatically overwrite an existing file. Chapter 3. Commands for Managing the Switch | 153