Netgear XCM8806 Chassis Hardware Installation Guide - Page 237

NETGEAR 8800 Chassis Switch CLI Manual • If this number is lower than the number displayed for the Actor Sys-Pri, the system at the remote end is the controlling partner in the LAG. • Partner Key • LACP key automatically generated by the system to which this aggregator is connected. • If this number is lower than the number displayed for the Actor Key, the partner system is the controlling partner in the LAG. • Agg Count • Identifies the number of ports added to the aggregator for that LAG. Example The following command displays the LACP LAGs on the switch: show lacp The following is sample output from this command: LACP Up : Yes LACP Enabled : Yes System MAC : 00:04:96:10:33:60 LACP PDUs dropped on non-LACP ports : 0 Lag Actor Actor Partner Partner Partner Agg Sys-Pri Key MAC Sys-Pri Key Count 2:1 90 0x07d1 00:01:30:f9:9c:30 601 0x1391 2 4:5 100 0x0fa5 00:01:30:f9:9c:30 321 0x1f47 16 4:9 677 0x0fa9 00:01:30:f9:9c:30 87 0x0fa9 8 show lacp counters show lacp counters Description Displays all LACP, or dynamic link aggregation, counters for all member ports in the system. Syntax Description This command has no parameters or variables. Default N/A. Usage Guidelines This command displays the following information for all link aggregation groups (LAGs): Chapter 5. Commands for Configuring Slots and Ports on a Switch | 237