Netgear XCM8806 Chassis Hardware Installation Guide - Page 922

NETGEAR 8800 Chassis Switch CLI Manual Default 30,000 milliseconds. Usage Guidelines The reachable time is the time, in milliseconds, that a node assumes a neighbor is reachable after having received a reachability confirmation. A value of 0 means the time is unspecified by this router. The maximum value is 3,600,000 (1 hour). Example The following command configures the reachable time to be 3,600,000 milliseconds for the VLAN top_floor: configure vlan top_floor router-discovery reachable-time 3600000 configure vlan router-discovery retransmit-time configure vlan router-discovery {ipv6} retransmit-time Description Configures the retransmit time value in router discovery advertisements on the VLAN. Syntax Description vlan_name retransmittime Specifies an IPv6 configured VLAN. Specifies the reachable time value in advertisements, in milliseconds. Range is 0 to 4,294,967,295 (approximately 50 days). Default 1,000 milliseconds. Usage Guidelines This command configures the retransmit time value in the router advertisement messages. The retransmit time, in milliseconds, is the time between retransmitted neighbor solicitation messages. A value of 0 means the value is unspecified by this router. The maximum value is 4,294,967,295. Example The following command configures the retransmit time to be 604,800,000 milliseconds (one week) for the VLAN top_floor: configure vlan top_floor router-discovery retransmit-time 604800000 922 | Chapter 20. IPv6 Unicast Commands