Netgear XCM8806 Chassis Hardware Installation Guide - Page 83

NETGEAR 8800 Chassis Switch CLI Manual Description Deletes access rights for a group. Syntax Description all-non-defaults hex_group_name group_name sec-model snmpv1 snmpv2c usm sec-level noauth authnopriv priv Specifies that all non-default (non-permanent) security groups are to be deleted. Specifies the group name to be deleted. The value is to be supplies as a colon separated string of hex octets. Specifies the group name to be deleted in ASCII format. Specifies the security model to use. Specifies the SNMPv1 security model. Specifies the SNMPv2c security model. Specifies the SNMPv3 User-based Security Model (USM). Specifies the security level for the group. Specifies no authentication (and implies no privacy) for the security level. Specifies authentication and no privacy for the security level. Specifies authentication and privacy for the security level. Default The default values are: • sec-model-USM • sec-level-noauth Usage Guidelines Use this command to remove access rights for a group. Use the all-non-defaults keyword to delete all the security groups, except for the default groups. The default groups are: admin, initial, v1v2c_ro, v1v2c_rw. Deleting an access will not implicitly remove the related group to user association from the VACMSecurityToGroupTable. To remove the association, use the following command: configure snmpv3 delete group {[[hex ] | ]} user [all-non-defaults | {[[hex ] | ] {sec-model [snmpv1|snmpv2c|usm]}}] Example The following command deletes all entries with the group name userGroup: configure snmpv3 delete access userGroup Chapter 3. Commands for Managing the Switch | 83