Netgear XCM8806 Chassis Hardware Installation Guide - Page 164

NETGEAR 8800 Chassis Switch CLI Manual Default Disabled. Usage Guidelines This command enables the XML configuration mode on the switch, however XML configuration mode is not supported for end users, and NETGEAR strongly cautions you not to enable this mode. Use this command only under the direction of NETGEAR. If you inadvertently issue this command, the switch prompt will be changed by adding the text (xml) to the front of the prompt. If you see this mode indicator, please disable XML configuration mode by using the following command: disable xml-mode Example The following command enables XML configuration mode on the switch: enable xml-mode ls ls {[internal-memory | memorycard]} {} Description Lists all configuration, policy, and if configured, core dump files in the system. Syntax Description internal-memory memorycard file-name Lists the core dump (debug) files that are present and saved in the internal memory card. Lists all of the files on the removable external compact flash memory card. Lists all the files that match the wildcard. Default N/A. Usage Guidelines When you use issue this command without any options, the output displays all of the configuration and policy files stored on the switch. When you configure and enable the switch to send core dump (debug) information to the internal memory card, specify the internal-memory option to display the core dump files stored on the internal memory card. For more information, see Core Dump Files on page 165. 164 | Chapter 4. Commands for Managing the NETGEAR 8800 Software