Netgear XCM8806 Chassis Hardware Installation Guide - Page 795
con vrrp vlan vrid add track-ping, VRRP Commands
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 795 highlights
NETGEAR 8800 Chassis Switch CLI Manual Description Creates a tracking entry for the specified route. When this route becomes unreachable, this entry is considered to be failing. Syntax Description vlan_name vridval ipaddress masklength Specifies the name of a VRRP VLAN. Specifies the virtual router ID of the target VRRP virtual router. Value can be in the range of 1-255. Specifies the prefix of the route to track. Specifies the length of the route's prefix. Default N/A. Usage Guidelines The route specified in this command might not exist in the IP routing table. When you create the entry for a route, an immediate VRRP failover might occur. Example The following command enables IP route failure tracking for routes to the specified subnet: configure vrrp vlan vlan-1 vrid 1 add track-iproute 3.1.0.0/24 configure vrrp vlan vrid add track-ping configure vrrp vlan vrid add track-ping frequency miss Description Creates a tracking entry for the specified IP address. The entry is tracked via pings to the IP address, sent at the specified frequency. Syntax Description vlan_name vridval ipaddress seconds Specifies the name of a VRRP VLAN. Specifies the VRRP virtual router ID of the target virtual router. Value can be in the range of 1-255. Specifies the IP address to be tracked. Specifies the number of seconds between pings to the target IP address. The range is 1 to 600 seconds. Chapter 18. VRRP Commands | 795