Netgear XCM8806 Chassis Hardware Installation Guide - Page 836

NETGEAR 8800 Chassis Switch CLI Manual Default Table 20 lists the relative priorities assigned to routes depending upon the learned source of the route. Table 20. Relative Route Priorities Route Origin Direct MPLS Blackhole Static ICMP EBGP IBGP OSPFIntra OSPFInter RIP OSPFAsExt OSPF External 1 OSPF External 2 BOOTP Priority 10 20 50 1100 1200 1700 1900 2200 2300 2400 3100 3200 3300 5000 Usage Guidelines Although these priorities can be changed, do not attempt any manipulation unless you are expertly familiar with the possible consequences. If you change the route priority, you must save the configuration and reboot the system. Note: The priority for a blackhole route cannot overlap with the priority of any other route origin. Example The following command sets IP route priority for static routing to 1200: configure iproute priority static 1200 836 | Chapter 19. IP Unicast Commands