Netgear XCM8806 Chassis Hardware Installation Guide - Page 551

NETGEAR 8800 Chassis Switch CLI Manual Default Displays egress QoS information for all ports. Usage Guidelines The displayed QoS profile information differs depending on the platform you are running on. The following section shows examples for different platforms. Example The display varies depending on your platform. The following shows the information that appears when you omit the optional port parameter: BD-8810Rack3.3 # show qosprofile QP1 Weight = 1 Max Buffer Percent = 100 QP2 Weight = 1 Max Buffer Percent = 100 QP8 Weight = 1 Max Buffer Percent = 100 The following example shows how the display appears when the switch is configured for weighted-round-robin mode and some QoS profiles are configured for strict priority mode: BD-8810.7 # show qosprofile QP1 Weight = 1 Max Buffer Percent = 100 QP2 Weight = 1 Max Buffer Percent = 100 QP3 Weight = 1 Max Buffer Percent = 100 QP5 Strict-Priority Max Buffer Percent = 100 QP8 Strict-Priority Max Buffer Percent = 100 When you add the optional port parameter, the switch displays the following sample output: BD-8810Rack3.6 # show qosprofile port 8:1 Port: 8:1 QP1 QP2 QP8 MinBw = MinBw = MinBw = 0% MaxBw = 0% MaxBw = 0% MaxBw = 100% 100% 100% unconfigure diffserv examination The syntax is: unconfigure diffserv examination Description Disables DiffServ traffic groups. Default Disabled. Chapter 14. QoS Commands | 551