Netgear XCM8806 Chassis Hardware Installation Guide - Page 79
con snmpv3 add target-params
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
NETGEAR 8800 Chassis Switch CLI Manual The list of tag-lists must match one or more of the tags in the snmpNotifyTable for the trap to be sent out. Example The following command specifies a target address of 10.203.0.22 with the name A1, and associates it with the security parameters and target address parameter P1: configure snmpv3 add target-addr A1 param P1 ipaddress 10.203.0.22 The following command specifies a target address of 10.203.0.22 with the name A1, and associates it with the security parameters and target address parameter P1, and the notification tags type1 and type2: configure snmpv3 add target-addr A1 param P1 ipaddress 10.203.0.22 from 10.203.0.23 tag-list type1,type2 configure snmpv3 add target-params configure snmpv3 add target-params [[hex ] | ] user [[hex ] | ] mp-model [snmpv1 | snmpv2c | snmpv3] sec-model [snmpv1 | snmpv2c | usm] {sec-level [noauth | authnopriv | priv]} {volatile} Description Adds and configures SNMPv3 target parameters. Syntax Description hex_param_name param_name hex_user_name user_name mp-model sec-model snmpv1 snmpv2c usm sec-level noauth authnopriv priv Specifies the parameter name associated with the target. The value is to be supplied as a colon separated string of hex octets. Specifies the parameter name associated with the target in ASCII format. Specifies a user name. The value is to be supplied as a colon separated string of hex octets. Specifies a user name in ASCII format. Specifies a message processing model; choose from SNMPv1, SNMPv2, or SNMPv3. Specifies the security model to use. Specifies the SNMPv1 security model. Specifies the SNMPv2c security model. Specifies the SNMPv3 User-based Security Model (USM). Specifies the security level for the group. Specifies no authentication (and implies no privacy) for the security level. Specifies authentication and no privacy for the security level. Specifies authentication and privacy for the security level. Chapter 3. Commands for Managing the Switch | 79