Netgear XCM8806 Chassis Hardware Installation Guide - Page 301
con inline-power budget, PoE Commands, NETGEAR 8800 Chassis Switch CLI Manual
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 301 highlights
NETGEAR 8800 Chassis Switch CLI Manual port_list Specifies one or more ports or slots and ports. Default N/A. Usage Guidelines Use this command to clear all the information displayed by the show inline-power stats ports command. Example The following command clears the inline statistics for ports 1-8 on slot 3: clear inline-power stats ports 3:1-3:8 The following command displays cleared inline power configuration information for ports 1-8 in slot 3: show inline-power stats ports 3:1-3:8 Following is sample output from this command: Port 3:1 3:2 3:3 3:4 3:5 3:6 3:7 3:8 State delivering delivering searching searching searching searching searching searching Class class3 class3 class0 class0 class0 class0 class0 class0 STATISTICS COUNTERS Absent InvSig Denied 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 OverCurrent 0 0 0 0 0 0 0 0 Short 0 0 0 0 0 0 0 0 configure inline-power budget configure inline-power budget {slot } Description Sets the reserved power on the switch or specified slot to the specified watts. Syntax Description num_watts slot Specifies the number of watts to reserve for specified switch or slot for inline power. Enter an integer. The minimum value is 37, or 0 if the slot is disabled; the maximum is 768; and the default value is 50. Specifies a slot. The slot must be configured to hold a PoE module. Chapter 7. PoE Commands | 301