Netgear XCM8806 Chassis Hardware Installation Guide - Page 428
con protocol delete, llc - LLC Service Advertising Protocol.
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 428 highlights
NETGEAR 8800 Chassis Switch CLI Manual Usage Guidelines Supported protocol types include: • etype - IEEE Ethertype. • llc - LLC Service Advertising Protocol. • snap - Ethertype inside an IEEE SNAP packet encapsulation. A maximum of 15 protocol filters, each containing a maximum of six protocols, can be defined. The protocol filter must already exist before you can use this command. Use the create protocol command to create the protocol filter. No more than seven protocols can be active and configured for use. Example The following command configures a protocol named Fred by adding protocol type LLC SAP with a value of FFEF: configure protocol fred add llc 0xfeff configure protocol delete configure protocol delete [etype | llc | snap] {[etype | llc | snap] } ... Description Deletes the specified protocol type from a protocol filter. Syntax Description name hex Specifies a protocol filter name. Specifies a four-digit hexadecimal number between 0 and FFFF that represents: • The Ethernet protocol type taken from a list maintained by the IEEE. • The DSAP/SSAP combination created by concatenating a two-digit LLC Destination SAP (DSAP) and a two-digit LLC Source SAP (SSAP). • The SNAP-encoded Ethernet protocol type. Default N/A. Usage Guidelines Supported protocol types include: • etype - IEEE Ethertype. 428 | Chapter 9. VLAN Commands