Netgear XCM8806 Chassis Hardware Installation Guide - Page 1095
con bgp neighbor password
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1095 highlights
NETGEAR 8800 Chassis Switch CLI Manual configure bgp neighbor password configure bgp neighbor [all | ] password [none | {encrypted} ] Description Configures an MD5 secret password for a neighbor. Syntax Description all remoteaddr none encrypted tcpPassword Specifies all neighbors. Specifies an IP address of a BGP neighbor. Specifies not to use a password Specifies an encrypted string; do not use. Specifies a password string. Default N/A. Usage Guidelines Disable the BGP neighbor or the BGP protocol before changing the password. When a password is configured, TCP MD5 authentication is enabled on the TCP connection that is established with the neighbor. Changes made to the parameters of a peer group are applied to all neighbors in the peer group. To change any one of the following parameters you must disable and re-enable the peer session: • timer • source-interface • soft-in-reset • password Changing a route reflector client automatically disables and enables the peer session. The encrypted option is used by the switch when generating a configuration file, and when parsing a switch-generated configuration file. Do not select the encrypted option in the CLI. Example The following command configures the password for a neighbor as netgear: configure bgp neighbor 192.168.1.5 password netgear Chapter 25. BGP Commands | 1095