Netgear XCM8806 Chassis Hardware Installation Guide - Page 587
con tacacs server client-ip
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 587 highlights
NETGEAR 8800 Chassis Switch CLI Manual • RSA for public key cryptography (generation of certificate and public-private key pair, certificate signing). RSA key size between 1024 and 4096 bits. • Symmetric ciphers (for data encryption): RC4, DES, and 3DES. • Message Authentication Code (MAC) algorithms: MD5 and SHA. The certificate and private key file should be in PEM format and generated using RSA as the cryptography algorithm. Example The following command obtains the pre-generated private key from the user: configure ssl privkey pregenerated Next, you the open the certificate and then copy and paste the certificate into the console/Telnet session, followed by a RETURN to end the command. configure tacacs server client-ip configure tacacs [primary | secondary] server [ | ] {} client-ip {vr } Description Configures the server information for a TACACS+ authentication server. Syntax Description primary secondary ipaddress hostname tcp_port ipaddress vr_name Configures the primary TACACS+ server. Configures the secondary TACACS+ server. The IP address of the TACACS+ server being configured. The host name of the TACACS+ server being configured. The TCP port to use to contact the TACACS+ server. The IP address used by the switch to identify itself when communicating with the TACACS+ server. Specifies the virtual router on which the client IP is located. Note: User-created VRs are supported only on the platforms listed for this feature in Appendix A in the NETGEAR 8800 User Manual. Default TACACS+ uses TCP port 49. The default virtual router is VR-Mgmt, the management virtual router. Chapter 15. Security Commands | 587