Netgear XCM8806 Chassis Hardware Installation Guide - Page 41
enable clipaging
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
NETGEAR 8800 Chassis Switch CLI Manual Default Disabled. Usage Guidelines None. Example The following command enables using the spacebar to automatically complete a command: enable cli space-completion enable clipaging enable clipaging Description Enables the pause mechanism and does not allow the display to print continuously to the screen. Syntax Description This command has no arguments or variables. Default Enabled. Usage Guidelines The command line interface (CLI) is designed for use in a VT100 environment. Most show command output will pause when the display reaches the end of a page. To view the status of CLI paging on the switch, use the show management command. The show management command displays information about the switch including the enable/disable state for CLI paging. If CLI paging is enabled and you use the show tech command to diagnose system technical problems, the CLI paging feature is disabled. CLI paging is only active on a per-shell session basis. In other words, when you enable or disable CLI paging from within the current configuration, it only affects that session. For new or existing sessions, paging is enabled by default. This setting cannot be saved. Example The following command enables clipaging and does not allow the display to print continuously to the screen: enable clipaging Chapter 2. Commands for Accessing the Switch | 41