Netgear XCM8806 Chassis Hardware Installation Guide - Page 163
Description, Command Syntax, Default, Usage Guidelines, Example, enable xml-mode
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
NETGEAR 8800 Chassis Switch CLI Manual Description Enables CPU monitoring on the switch. Command Syntax seconds threshold Specifies the monitoring interval, in seconds. The default is 5 seconds, and the range is 5 to 60 seconds. Specifies the CPU threshold value. CPU usage is measured in percentages. The default is 90%, and the range is 0% to 100%. Default CPU monitoring is enabled and occurs every 5 seconds. The default CPU threshold value is 90%. Usage Guidelines CPU monitoring allows you to monitor the CPU utilization and history for all of the processes running on the switch. By viewing this history on a regular basis, you can see trends emerging and identify processes with peak utilization. Monitoring the workload of the CPU allows you to troubleshoot and identify suspect processes before they become a problem. To specify the frequency of CPU monitoring, use the interval keyword. NETGEAR recommends the default setting for most network environments. CPU usage is measured in percentages. By default, the CPU threshold value is 90%. When CPU utilization of a process exceeds 90% of the regular operating basis, the switch logs an error message specifying the process name and the current CPU utilization for the process. To modify the CPU threshold level, use the threshold keyword. The range is 0% to 100%. Example The following command enables CPU monitoring every 30 seconds: enable cpu-monitoring interval 30 enable xml-mode enable xml-mode Description Enables XML configuration mode on the switch. Command Syntax This command has no arguments or variables. Chapter 4. Commands for Managing the NETGEAR 8800 Software | 163