Netgear XCM8806 Chassis Hardware Installation Guide - Page 128

NETGEAR 8800 Chassis Switch CLI Manual Usage Guidelines Use the get option to establish an index into the SNMP MIB. After the get option is executed, you can use the get next option to step through the MIB objects. Example The following gets the contents of SNMP object 1.3.6.1.2.1.1.5.0: show snmp get 1.3.6.1.2.1.1.5.0 system.5.0 = BD-12804 show snmp vr_name show snmp {vr} Description Displays the SNMP configuration and statistics on a virtual router. Syntax Description vr_name Specifies the virtual router. Default N/A. Usage Guidelines Use this command to display the SNMP configuration and statistics on a virtual router. Example The following command displays configuration and statistics for the virtual router VR-Default: show snmp vr VR-Default Following is sample output for the command: SNMP access : Disabled SNMP Traps : Enabled SNMP v1/v2c TrapReceivers : Destination Source IP Address 10.120.91.89 /162 Flags: Version: 1=v1 2=v2c Mode: S=Standard E=Enhanced Flags 2E SNMP stats: SNMP traps: InPkts 300 Gets 0 Sent 0 OutPkts 300 GetNexts 300 AuthTraps Enabled Errors 0 Sets 0 AuthErrors 0 Drops 0 128 | Chapter 3. Commands for Managing the Switch