Netgear XCM8806 Chassis Hardware Installation Guide - Page 586

NETGEAR 8800 Chassis Switch CLI Manual code org_name name Specifies the country code in 2-character form. Specifies the organization name. The organization name can be up to 64 characters long. Specifies the common name. The common name can be up to 64 characters long. Default N/A. Usage Guidelines This command creates a self signed certificate and private key that can be saved in the EEPROM. The certificate generated is in the PEM format. Any existing certificate and private key is overwritten. The size of the certificate depends on the RSA key length (privkeylen) and the length of the other parameters (country, organization name, and so forth) supplied by the user. If the RSA key length is 1024, then the certificate is approximately 1 kb. For an RSA key length of 4096, the certificate length is approximately 2 kb, and the private key length is approximately 3 kb. Example The following command creates an SSL certificate in the USA for a website called bigcats: configure ssl certificate privkeylen 2048 country US organization IEEE common-name bigcats configure ssl privkey pregenerated configure ssl privkey pregenerated Description Obtains the pre-generated private key from the user. Syntax Description This command has no arguments or variables. Default N/A. Usage Guidelines This command is also used when downloading or uploading the configuration. The private key is stored in the EEPROM, and the certificate is stored in the configuration file. With this command, you copy and paste the private key into the command line followed by a blank line to end the command. The following security algorithms are supported: 586 | Chapter 15. Security Commands