Netgear XCM8806 Chassis Hardware Installation Guide - Page 934
show ipconfig ipv6, IP address/netmask/etc.
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 934 highlights
NETGEAR 8800 Chassis Switch CLI Manual vr_name Specifies the virtual router for which to display the route. Default vr_name is the VR of the current CLI context. Usage Guidelines None. Example The following example displays the RPF lookup for multicast source 12.1.20.12 in VR-Default: rtlookup 3aaa:5643::ef80:2525:1023:5213 rpf vr vr-default show ipconfig ipv6 show ipconfig ipv6 {vlan | tunnel } Description Displays configuration information for one or more interfaces. Syntax Description vlan_name tunnelname Specifies an IPv6 configured VLAN. Specifies an IPv6 tunnel. Default N/A. Usage Guidelines If no interface is specified, then global IP configuration is displayed. Otherwise, specific interface(s) will be displayed. Global IP configuration information includes: • IP address/netmask/etc. • IP forwarding information / IP multicast forwarding information Example The following command displays configuration information on a VLAN named accounting: show ipconfig ipv6 vlan accounting 934 | Chapter 20. IPv6 Unicast Commands