Netgear XCM8806 Chassis Hardware Installation Guide - Page 327
uncon inline-power operator-limit ports
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 327 highlights
NETGEAR 8800 Chassis Switch CLI Manual Description On a NETGEAR 8800 switch, unconfigures the disconnect precedence setting and returns the switch to the default disconnect precedence value of deny port. Syntax Description This command has no arguments or variables. Default Deny-port. Usage Guidelines You configure this parameter for the entire switch; you cannot configure this per slot or per port. Unconfigures the PoE disconnect precedence previously set for the NETGEAR 8800 switch and returns the disconnect precedence to the default value of deny port. Deny port denies power to the next PD that requests inline power from the slot when the inline power budget for the switch or slot is reached, regardless of the inline power port priority. Example The following command resets the switch to the PoE disconnect precedence value, which is deny port: unconfigure inline-power disconnect-precedence unconfigure inline-power operator-limit ports unconfigure inline-power operator-limit ports [all |] Description Unconfigures the PoE operator limit setting and resets the power limit allowed for PDs connected to the specified ports to the default value of 15400 mW. Syntax Description all port_list Specifies all ports. Specifies one or more slots and ports. Default 15400 mW. Chapter 7. PoE Commands | 327