Netgear XCM8806 Chassis Hardware Installation Guide - Page 940
show tunnel, The following command displays router discovery settings for the VLAN
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 940 highlights
NETGEAR 8800 Chassis Switch CLI Manual Syntax Description vlan_name Specifies an IPv6 configured VLAN. Default N/A. Usage Guidelines If no VLAN is specified, the settings are displayed for all IPv6 configured VLANs. Example The following command displays router discovery settings for the VLAN top_floor: show router-discovery vlan top_floor The following is sample output: Router Advertisements disabled on v1 Minimum/Maximum Interval: 200 / 600 Managed / Other Info Flags: Off / Off Link MTU: 0 Reachable Time: 0 Retrans Timer: 0 Current Hop Limit: 64 Default Lifetime: 1800 Number of Prefixes: 1, Prefix List: Valid Prefix Lifetime 11::1/64 2592000 Preferred Auto Lifetime OnLink On 604800 On show tunnel show [{tunnel} {}] Description Displays system tunnel information for a specified tunnel or for all tunnels. Syntax Description tunnel_name Specifies an IPv6-in-IPv4 or IPv6-to-IPv4 tunnel name. 940 | Chapter 20. IPv6 Unicast Commands