Netgear XCM8806 Chassis Hardware Installation Guide - Page 1287
show msdp, with the IP address 192.168.45.43
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1287 highlights
NETGEAR 8800 Chassis Switch CLI Manual • multicast-group • multicast-source • pim-rp • Set: • permit • deny Example The following command enables processing of SA request messages received from a peer with the IP address 192.168.45.43: enable msdp peer 192.168.45.43 process-sa-request sa-request-filter intra_domain show msdp show msdp {vr } Description This command displays global configuration and run-time parameters for MSDP. Syntax Description vrname Specifies the name of the virtual router to which this command applies. If a name is not specified, it is extracted from the current CLI context. Default N/A. Usage Guidelines Use this command to verify the global configuration parameters of MSDP. Example The following command displays global configuration and run-time parameters for MSDP: Switch.2 # show msdp MSDP Enabled Originator RP Addr Store SA Cache Export Local SAs Max Rejected Cache Num of Rejected SAs Num of Local SAs : No : not configured : Yes : Yes : not configured : 0 : 0 VR-Name : VR-Default SA Cache ageout time : 360 SA Cache Server : not configured Export SA filter : not configured Encapsulate data : Yes Total Num of SAs : 0 AS Disp Format : Asdot Chapter 28. MSDP Commands | 1287