Netgear XCM8806 Chassis Hardware Installation Guide - Page 80

NETGEAR 8800 Chassis Switch CLI Manual volatile Specifies volatile storage. By specifying volatile storage, the configuration is not saved across a switch reboot. Default The default values are: • sec-level-noauth • non-volatile storage Usage Guidelines Use this command to create an entry in the SNMPv3 snmpTargetParamsTable. This table specifies the message processing model, security level, security model, and the storage parameters for messages to any target addresses associated with a particular parameter name. To associate a target address with a parameter name, see the command configure snmpv3 add target-addr. Example The following command specifies a target parameters entry named P1, a user name of guest, message processing and security model of SNMPv2c, and a security level of no authentication: configure snmpv3 add target-params P1 user guest mp-model snmpv2c sec-model snmpv2c sec-level noauth configure snmpv3 add user configure snmpv3 add user [[hex ] | ] {authentication [md5 | sha] [hex | ]} {privacy {des | 3des | aes {128 | 192 | 256}} [[hex ] | ]} }{volatile} Description Adds (and modifies) an SNMPv3 user. Syntax Description hex_user_name user_name MD5 SHA authentication Specifies the user name to add or modify. The value is to be supplied as a colon separated string of hex octets. Specifies the user name to add or modify in ASCII format. Specifies MD5 authentication. Specifies SHA authentication. Specifies the authentication password or hex string to use for generating the authentication key for this user. 80 | Chapter 3. Commands for Managing the Switch