Netgear XCM8806 Chassis Hardware Installation Guide - Page 589
con tacacs timeout, con tacacs-accounting server
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 589 highlights
NETGEAR 8800 Chassis Switch CLI Manual configure tacacs-accounting primary shared-secret purplegreen configure tacacs timeout configure tacacs timeout Description Configures the timeout interval for TACAS+ authentication requests. Syntax Description seconds Specifies the number of seconds for authentication requests. Range is 3 to 120 seconds. Default The default is 3 seconds. Usage Guidelines Use this command to configure the timeout interval for TACACS+ authentication requests. To detect and recover from a TACACS+ server failure when the timeout has expired, the switch makes one authentication attempt before trying the next designated TACACS+ server or reverting to the local database for authentication. In the event that the switch still has IP connectivity to the TACACS+ server, but a TCP session cannot be established, (such as a failed TACACS+ daemon on the server), failover happens immediately regardless of the configured timeout value. For example, if the timeout value is set for 3 seconds (the default value), it will take 3 seconds to fail over from the primary TACACS+ server to the secondary TACACS+ server. If both the primary and the secondary servers fail or are unavailable, it takes approximately 6 seconds to revert to the local database for authentication. Example The following command configures the timeout interval for TACACS+ authentication to 10 seconds: configure tacacs timeout 10 configure tacacs-accounting server configure tacacs-accounting [primary | secondary] server [ | ] {} client-ip {vr } Description Configures the TACACS+ accounting server. Chapter 15. Security Commands | 589