Netgear XCM8806 Chassis Hardware Installation Guide - Page 920

NETGEAR 8800 Chassis Switch CLI Manual Default 600 seconds Usage Guidelines This command configures the maximum amount of time before an unsolicited router advertisement message is advertised over the links corresponding to the VLAN. Example The following command configures the max-interval to be 300 seconds for the VLAN top_floor: configure vlan top_floor router-discovery max-interval 300 configure vlan router-discovery min-interval configure vlan router-discovery {ipv6} min-interval Description Configures the minimum time between unsolicited router discovery advertisements on the VLAN. Syntax Description vlan_name mininterval Specifies an IPv6 configured VLAN. Specifies the minimum time between advertisements, in seconds. Range is 3 to 1350 (see guidelines). Default 200 seconds, or max-interval * .33 (see guidelines) Usage Guidelines This command configures the minimum amount of time before an unsolicited router advertisement message is advertised over the links corresponding to the VLAN. The minimum value is 3 seconds. The maximum time is (.75 * max-interval) seconds. If you do not explicitly set this value, the min-interval value is reset whenever the max-interval is configured. Min-interval will then be dynamically adjusted to .33 times the max-interval. Example The following command configures the min-interval to be 300 seconds for the VLAN top_floor: configure vlan top_floor router-discovery min-interval 300 920 | Chapter 20. IPv6 Unicast Commands