Netgear XCM8806 Chassis Hardware Installation Guide - Page 559

NETGEAR 8800 Chassis Switch CLI Manual Default The default is one second. Usage Guidelines This command configures how often the DoS protection counter is monitored. Example This example sets the interval to 5 seconds: configure dos-protect interval 5 configure dos-protect trusted ports configure dos-protect trusted-ports  [ports [ | all]  | add-ports [ | all]  | delete-ports [ | all] ] Description Configures the list of trusted ports. Syntax Description ports ports-to-add all ports-to-delete Specifies the trusted ports list. Specifies the ports to add to the trusted ports list. Specifies all the ports. Specifies the ports to delete from the trusted ports list. Default N/A. Usage Guidelines Traffic from trusted ports will be ignored when DoS protect counts the packets to the CPU. If we know that a machine connected to a certain port on the switch is a safe "trusted" machine, and we know that we will not get a DoS attack from that machine, the port where this machine is connected to can be configured as a trusted port, even though a large amount of traffic is going through this port. Example This example sets the trusted port list to 3:1-3:7: configure dos-protect trusted-ports ports 3:1-3:7 Chapter 15. Security Commands | 559