Netgear XCM8806 Chassis Hardware Installation Guide - Page 1281
disable msdp peer, disable msdp process-sa-request
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1281 highlights
NETGEAR 8800 Chassis Switch CLI Manual command), and then re-enable it with an export filter (with the enable msdp export local-sa export-filter command). Example The following command disables the advertisement of local sources: disable msdp export local-sa disable msdp peer disable msdp [{peer} | peer all] {vr } Description Configures the administrative state of an MSDP peer. Syntax Description all remoteaddr vrname Disables all MSDP peers. Specifies the IP address of the MSDP peer to disable. Specifies the name of the virtual router to which this command applies. If a name is not specified, it is extracted from the current CLI context. Default By default, MSDP peers are disabled. Usage Guidelines Use this command to administratively disable MSDP peers to stop exchanging SA messages. Example The following command disables an MSDP peer: disable msdp peer 192.168.45.43 disable msdp process-sa-request disable msdp [{peer} | peer all] process-sa-request {vr } Description This command configures a router to reject SA request messages from a specified peer or all peers. Chapter 28. MSDP Commands | 1281