Netgear XCM8806 Chassis Hardware Installation Guide - Page 81

NETGEAR 8800 Chassis Switch CLI Manual privacy des 3des aes 128 192 256 volatile Specifies the privacy password or hex string to use for generating the privacy key for this user. Specifies the use of the 56-bit DES algorithm for encryption. This is the default. Specifies the use of the 168-bit 3DES algorithm for encryption. Specifies the use of the AES algorithm for encryption. Specifies the use of the 128-bit AES algorithm for encryption. Specifies the use of the 192-bit AES algorithm for encryption. Specifies the use of the 256-bit AES algorithm for encryption. Specifies volatile storage. By specifying volatile storage, the configuration is not saved across a switch reboot. Default The default values are: • authentication-no authentication • privacy-no privacy • non-volatile storage Usage Guidelines Use this command to create or modify an SNMPv3 user configuration. The default user names are: admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv. The initial password for admin is password. For the other default users, the initial password is the user name. If hex is specified, supply a 16 octet hex string for MD5, or a 20 octet hex string for SHA. You must specify authentication if you want to specify privacy. There is no support for privacy without authentication. Note: 3DES, AES 192, and AES 256 bit encryptions are proprietary implementations and may not work with some SNMP managers. Example The following command configures the user guest on the local SNMP Engine with security level noauth (no authentication and no privacy): configure snmpv3 add user guest The following command configures the user authMD5 to use MD5 authentication with the password palertyu: Chapter 3. Commands for Managing the Switch | 81