Netgear XCM8806 Chassis Hardware Installation Guide - Page 293
any enabled VLAN-specific TLVs.
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 293 highlights
NETGEAR 8800 Chassis Switch CLI Manual show lldp show lldp {port [all | ]} {detailed} Description Displays LLDP configuration information for the specified port or ports. Use the detailed keyword to display the configured VLANs on the port and the enabled VLAN-specific TLVs. Syntax Description all port_list detailed Specifies all ports on the switch. Specifies one or more ports or slots and ports. Shows information on the configured VLANs on the port. Default N/A. Usage Guidelines Use the detailed variable to display information regarding configured VLANs on the ports and any enabled VLAN-specific TLVs. Example The following example displays LLDP configuration information for the switch: # show lldp LLDP transmit interval : 30 seconds LLDP transmit hold multiplier : 4 (used TTL = 120 seconds) LLDP transmit delay : 2 seconds LLDP SNMP notification interval : 5 seconds LLDP reinitialize delay : 2 seconds LLDP-MED fast start repeat count : 4 LLDP Port Configuration: Port Rx Tx SNMP Optional enabled transmit TLVs Mode Mode Notification LLDP 802.1 802.3 MED AvEx 1:1 Enabled Enabled -- --D-- --- ---- CLP- ---- 1:2 Enabled Enabled L- --D-- --- ---- C-P- ---- 7:1 Enabled Enabled LM --D-- --- ---- CLP- ---- Notification: (L) lldpRemTablesChange, (M) lldpXMedTopologyChangeDetected Chapter 6. Commands for Configuring LLDP | 293