Netgear XCM8806 Chassis Hardware Installation Guide - Page 1068
show ospfv3 lsdb, The following command displays information about the OSPFv3 interfaces on the VLAN
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1068 highlights
NETGEAR 8800 Chassis Switch CLI Manual Flags : (f) Interface Forwarding Enabled, (i) Interface OSPF Enabled, (p) Passive Interface, (r) Router OSPF Enable. The following command displays information about the OSPFv3 interfaces on the VLAN to5: show ospfv3 interfaces vlan to5 The following is sample output: Interface : to5 Enabled : ENABLED Router : ENABLED AreaID : 3.0.0.0 RouterID : 20.0.0.1 Link Type : broadcast Passive : No Cost : 40A Priority : 1 Transit Delay : 1s Hello Interval : 10s Rtr Dead Time : 40s Retransmit Interval : 5s Wait Timer : 40s Interface ID : 63 Instance ID : 0 State : BDR Number of state chg : 2 Hello due in : 3s Number of events : 3 Total Num of Nbrs : 1 Nbrs in FULL State : 1 Hellos Rxed : 94 Hellos Txed : 94 DB Description Rxed : 4 DB Description Txed : 3 LSA Request Rxed : 1 LSA Request Txed : 1 LSA Update Rxed : 8 LSA Update Txed : 7 LSA Ack Rxed : 6 LSA Ack Txed : 5 In Discards : 0 DR RtId : 10.0.0.5 BDR RtId : 20.0.0.1 DR Interface addr : fe80::280:c8ff:feb9:1cf1 BDR Interface addr : fe80::280:c8ff:feb9:2089 Neighbors: RtrId: 10.0.0.5 IpAddr: fe80::280:c8ff:feb9:1cf1 Pri: 1 Type: Auto State: FULL DR: 10.0.0.5 BDR: 20.0.0.1 Dead Time: 00:00:36 Options: 0x13 (-|R|-|-|E|V6) Opaque LSA: No show ospfv3 lsdb show ospfv3 {domain } lsdb {detail} {area [ | all] {lstype [router | network | inter-prefix | inter-router | intra-prefix]} | [vlan [ | all] | tunnel [ | all]] {lstype link} | lstype [as-external | router | network | inter-prefix | inter-router | intra-prefix | link]} {lsid } {adv-router } Description Displays a table of the current Link-State Database (LSDB). 1068 | Chapter 24. OSPFv3 Commands