Netgear XCM8806 Chassis Hardware Installation Guide - Page 1362

NETGEAR 8800 Chassis Switch CLI Manual For more detailed information about the top command including display options, command fields, and command usage, please refer to your UNIX documentation. Example The following command displays the real-time CPU utilization information by process: top upload debug upload debug [ | ] {{vr} } Description Uploads debug information files to a tftp server. On a platform that has both primary and backup MSMs/MMs, debug information files are uploaded from both the backup and primary MSMs/MMs. Syntax Description hostname ipaddress vrname Specifies the host name of the TFTP server to which the debug files will be uploaded to. Specifies the IP address of the TFTP server to which the debug files will be uploaded to. Specifies the name of the virtual router. Default By default, the virtual router VR-Mgmt will be used. Usage Guidelines Note: Use this command only under the guidance of NETGEAR Technical Support personnel to troubleshoot the switch. Use this command to copy, upload debug information (for example, core, trace, show tech, configuration, and policy files) to the specified TFTP server. Progress messages are displayed that indicate the file being copied and when the copying is finished. Depending on your platform, the switch displays a message similar to the following: The following files on have been uploaded: Tarball Name: TechPubsLab_C_09271428.tgz ./primary.cfg 1362 | Appendix B. Troubleshooting Commands