Netgear XCM8806 Chassis Hardware Installation Guide - Page 136
show snmpv3 filter-profile
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
NETGEAR 8800 Chassis Switch CLI Manual Subtree Mask Type Storage Type Row Status : 1.3.6.1.4.1 : : Included : NonVolatile : Active show snmpv3 filter-profile show snmpv3 filter-profile {[[hex ] | ]} {param [[hex ] | ]} Description Displays the association between parameter names and filter profiles. Syntax Description hex_profile_name profile_name hex_param_name param_name Specifies the filter profile name. The value is to be supplied as a colon separated string of hex octets. Specifies the filter profile name in ASCII format. Specifies the parameter name. The values is to be supplied as a colon separated string of hex octets. Specifies the parameter name in ASCII format. Default N/A. Usage Guidelines Use this command to display the snmpNotifyFilterProfileTable. This table associates a filter profile with a parameter name. The parameter name is associated with target addresses, and the filter profile is associated with a series of filters, so, in effect, you are associating a series of filters with a target address. Example The following command displays the entry with filter profile prof1 with the parameter name P1: show snmpv3 filter-profile prof1 param P1 The following is sample output of this command: Filter Profile Params Name : p1 Name : prof1 Storage Type : NonVolatile Row Status : Active 136 | Chapter 3. Commands for Managing the Switch