Netgear XCM8806 Chassis Hardware Installation Guide - Page 615
Example, Description, Syntax Description, Default, Usage Guidelines, Remote IP Address Character Restrictions
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 615 highlights
NETGEAR 8800 Chassis Switch CLI Manual Example The following command disables SSL on the default port: disable web https download ssl certificate download ssl certificate Description Permits downloading of a certificate key from files stored in a TFTP server. Syntax Description ip_address cert file Specifies the IP address of the TFTP server. Specifies the name of the certificate key. Default N/A. Usage Guidelines If the download operation is successful, any existing certificate is overwritten. After a successful download, the software attempts to match the public key in the certificate against the private key stored. If the private and public keys do not match, the switch displays a warning message similar to the following: Warning: The Private Key does not match with the Public Key in the certificate. This warning acts as a reminder to also download the private key. Note: You can only download a certificate key in the VR-Mgmt virtual router. Downloaded certificates and keys are not saved across switch reboots unless you save your current switch configuration. Once you issue the save command, the downloaded certificate is stored in the configuration file and the private key is stored in the EEPROM. Remote IP Address Character Restrictions This section provides information about the characters supported by the switch for remote IP addresses. When specifying a remote IP address, the switch permits only the following characters: • Alphabetical letters, upper case and lower case (A-Z, a-z) Chapter 15. Security Commands | 615