Netgear XCM8806 Chassis Hardware Installation Guide - Page 813

NETGEAR 8800 Chassis Switch CLI Manual • Preempt-Indicates that the VRRP VLAN is configured for preempt mode, which controls whether a higher priority backup router preempts a lower priority master. • Authentication-If configured, identifies the VRRP simple password. • Virtual IP Addresses-If configured, the virtual IP address associated with the VRRP VLAN. • Tracked Pings-If configured, displays the: • Target IP address you are pinging. • Number of seconds between pings to the target IP address. • Number of misses allowed before this entry is considered to be failing. • Tracked IP Routes-If configured, displays the IP address and subnet mask of the tracked route(s). • Tracked VLANs-If configured, displays the name of the tracked VLAN(s). If you specify the stats keyword, you see counter and statistics information for the specified VRRP VLAN. Example The following command displays configuration information for the specified VRRP VLAN: show vrrp vlan blue The following is sample output from this command: VLAN: blue VRID: 2 VRRP: Disabled State: INIT Priority: 1(backup) Advertisement Interval: 1 sec Preempt: Yes Authentication: None Virtual IP Addresses: Tracked Pings: - Tracked IP Routes: - Tracked VLANs: - * indicates a tracking condition has failed The following command displays statistics for VLAN vrrp-1: show vrrp vlan vrrp-1 stats The following is sample output from this command: VLAN vrrp-1, VR ID 25 Chksum Err:0, Ver Err:0, VRID Err:0, Auth Mismatch:0, Pkt-len Err:0 Become Master:0, Adv recv:0, Adv Err:0, Auth Fail:0, TTL Err:0 Pri-0-recv:0, Pri-0-snt:0, Addr-List Err:0, Invalid Auth Err:0 Chapter 18. VRRP Commands | 813