Netgear XCM8806 Chassis Hardware Installation Guide - Page 1246

NETGEAR 8800 Chassis Switch CLI Manual Example The following command removes a static MLD entry so the multicast group ff02::a:b is not forwarded to VLAN marketing on ports 2:1-2:4, unless an MLD join message is received on the port: configure mld snooping marketing ports 2:1-2:4 delete static group ff02::a:b configure mld snooping vlan ports add static router configure mld snooping {vlan} ports add static router Description Configures VLAN ports to forward the traffic from all multicast groups, even if no MLD joins have been received on the port. Syntax Description vlanname portlist Specifies a VLAN name. Specifies one or more ports or slots and ports. On a modular switch, it can be a list of slots and ports. On a stand-alone switch, it can be one or more port numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8. Default None. Usage Guidelines Use this command to forward all multicast groups to the specified VLAN ports. In effect, this command emulates a multicast router attached to those ports. As long as the ports are configured with the static entry, all available multicast traffic is forwarded to those ports. Example The following command configures a static MLD entry so all multicast groups are forwarded to VLAN marketing on ports 2:1-2:4: configure mld snooping marketing ports 2:1-2:4 add static router configure mld snooping vlan ports delete static router configure mld snooping {vlan} ports delete static router Description Configures VLAN ports to stop forwarding the traffic from all multicast groups, unless MLD joins have been received on the port. 1246 | Chapter 27. IPv6 Multicast Commands