Netgear XCM8806 Chassis Hardware Installation Guide - Page 1221
show igmp snooping, The age since the last IGMP report for this group was received.
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1221 highlights
NETGEAR 8800 Chassis Switch CLI Manual name IGMPv3 Specifies a VLAN name. Display the IGMP group in IGMPv3 format (if group record is IGMPv3 compatible, otherwise display in earlier format). Default IGMPv2. Usage Guidelines If no VLAN is specified all VLANs are displayed. You can also filter the display by group address and by multicast stream sender address. The output of this command shows: • The multicast group address received. • The version of the IGMP group. • The name of the VLAN where the group address is being received. • The physical port where the group address is being received. If multiple ports within the VLAN have subscribers for the group, all the ports are listed. • The age since the last IGMP report for this group was received. Note: The show igmp group command output is populated on the router that is the PIM Rendezvous Point. Example The following command lists the IGMP group membership: show igmp group The following is sample output from this command: Group Address 239.2.4.70 224.0.1.24 239.255.255.254 Ver Vlan 2 banana 2 banana 2 banana Port Age 7 101 7 107 7 103 Total: 3 show igmp snooping show igmp snooping {detail {IGMPv3}} Description Displays IGMP snooping registration information for all VLANs. Chapter 26. IP Multicast Commands | 1221