Netgear XCM8806 Chassis Hardware Installation Guide - Page 1255
show mld, If you do not specify a VLAN, the command displays the switch configuration.
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1255 highlights
NETGEAR 8800 Chassis Switch CLI Manual This command can be used for troubleshooting purpose. It should be enabled for normal network operation. The command does not alter the snooping setting. Example The following command enables the MLD snooping proxy: enable mld snooping with-proxy show mld show mld {vlan} {} Description This command can be used to display an MLD-related configuration and group information, per VLAN or for the switch as a whole. Syntax Description vlan name Specifies a VLAN name. Default N/A. Usage Guidelines If you do not specify a VLAN, the command displays the switch configuration. Example The following command displays the MLD configuration: show mld The following is sample output from this command: MLD: Query Interval: 125 sec Max Response Time: 10 sec Last Member Query: 1 sec Robustness: 2 MLD Snooping: Router Timeout: 260 sec Host Timeout: 260 sec MLD Snooping Fast Leave Time: 1000 ms MLD Snooping Flag: forward-all-router MLD Snooping Flood-list: none MLD Snooping Proxy: Enable Chapter 27. IPv6 Multicast Commands | 1255