Netgear XCM8806 Chassis Hardware Installation Guide - Page 177

NETGEAR 8800 Chassis Switch CLI Manual Syntax Description slot a slot b slotid Specifies the MSM module installed in slot A. Specifies the MSM module installed in slot B. Specifies slot number for the node in a stack. The value can be from 1 to 8. Default N/A. Usage Guidelines Viewing statistics on a regular basis allows you to see how well your network is performing. When you keep simple daily records, you see trends emerging and notice problems arising before they cause major network faults. This way, statistics can help you get the best out of your network. This information may be useful for your technical support representative if you experience a problem. Depending on the software version running on your switch or your switch model, additional or different memory information might be displayed. You can also use the show memory process {slot } command to view the system memory and the memory used by the individual processes. When you issue the command without any parameters, the switch displays information about all of the MSMs/MMs installed in your system. Reading the Output The show memory command displays the following information in a tabular format: • System memory information (both total and free). • Current memory used by the individual processes. The current memory statistics for the individual process also includes the following: • The module (MSM A or MSM B) and the slot number of the MSM. • The name of the process. In general, the free memory count for an MSM/MM decreases when one or more running processes experiences an increase in memory usage. If you observe a continuous decrease in the free memory over an extended period of time, and you have not altered your switch configuration, please contact NETGEAR Technical Support. Chapter 4. Commands for Managing the NETGEAR 8800 Software | 177