Netgear XCM8806 Chassis Hardware Installation Guide - Page 1110
con bgp peer-group route-policy, RFC 5396
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1110 highlights
NETGEAR 8800 Chassis Switch CLI Manual Syntax Description peer-group-name number Specifies a peer group. Specifies a remote AS number. The range is 1 to 4294967295. Default N/A. Usage Guidelines The AS number is a 4-byte AS number in either the ASPLAIN or the ASDOT format as described in RFC 5396, Textual Representation of Autonomous System (AS) Numbers. Changes made to the parameters of a peer group are applied to all neighbors in the peer group. Modifying the following parameters automatically disables and enables the neighbors before changes take effect: • remote-as • timer • source-interface • soft-in-reset • password Example The following command configures the remote AS number for the peer group outer and its neighbors using the ASPLAIN 4-byte AS number format: configure bgp peer-group outer remote-AS-number 300000000 The following command configures the remote AS number for the peer group abc and its neighbors using the ASDOT 4-byte AS number format: configure bgp peer-group abc remote-AS-number 9.10176 configure bgp peer-group route-policy configure bgp peer-group {address-family [ipv4-unicast | ipv4-multicast]} route-policy [in |out] [none | ] Description Configures the policy for a peer group and all the neighbors of the peer group. 1110 | Chapter 25. BGP Commands