Netgear XCM8806 Chassis Hardware Installation Guide - Page 220

NETGEAR 8800 Chassis Switch CLI Manual Syntax Description port_list all Specifies one or more ports or slots and ports. Specifies all ports on the switch. Default Enabled. Usage Guidelines Use this command for security, administration, and troubleshooting purposes. When a port is disabled, the link is brought down. Example The following command disables ports 3, 5, and 12 through 15 on a stand-alone switch: disable ports 3,5,12-15 The following command disables slot 1, ports 3, 5, and 12 through 15: disable port 1:3,1:5,1:12-1:15 disable sharing disable sharing Description Disables a load-sharing group of ports, also known as a link aggregation group (LAG). Syntax Description port Specifies the logical port of a load-sharing group or link aggregation group (LAG). Specifies a port or a combination of the slot and port number. Default Disabled. Usage Guidelines When sharing is disabled, the logical port retains all configuration including VLAN membership. All other member ports are removed from all VLANs to prevent loops and their configuration is reset to default values. 220 | Chapter 5. Commands for Configuring Slots and Ports on a Switch