Netgear XCM8806 Chassis Hardware Installation Guide - Page 1103

NETGEAR 8800 Chassis Switch CLI Manual Default By default, the weight is 0. Usage Guidelines All routes learned from this peer are assigned the same weight. The route with the highest weight is more preferable when multiple routes are available to the same network. The range is 0 to 65,535. BGP selects routes based on the following precedence (from highest to lowest): • higher weight • higher local preference • shortest length (shortest AS path) • lowest origin code • lowest MED • route from external peer • lowest cost to Next Hop • lowest routerID Example The following command assigns a locally used weight of 10 to a neighbor connection: configure bgp neighbor 192.168.1.5 weight 10 configure bgp peer-group allowin-as configure bgp peer-group {address-family [ipv4-unicast | ipv4-multicast]} allowas-in {max-as-occurrence } Description Configures BGP to receive and accept a looped BGP route from the neighbors of the specified peer group, provided the number of occurrences of local AS number in AS-Path is less than or equal to that specified in as-count. Syntax Description peer-group-name address-family as-count Specifies a peer group The address family. BGP supports two address families: IPv4 Unicast and IPv4 Multicast The maximum number of occurrences of local AS number in the received route AS-Path. If the number of occurrences of local AS number in AS-Path is more than as-count, the route is not accepted. The valid range is from 1-16. Chapter 25. BGP Commands | 1103