Netgear XCM8806 Chassis Hardware Installation Guide - Page 580

NETGEAR 8800 Chassis Switch CLI Manual Usage Guidelines Use this command to specify the radius accounting server. The accounting server and the RADIUS authentication server can be the same. Use of the parameter requires that DNS be enabled. You can specify one pair of RADIUS accounting servers for switch management and another pair for network login. To specify RADIUS accounting servers for switch management (Telnet, SSH, and console sessions), use the mgmt-access keyword. To specify RADIUS accounting servers for network login, use the netlogin keyword. If you do not specify a keyword, switch management and network login use the same pair of RADIUS accounting servers. Example The following command configures RADIUS accounting on host radius1 using the default UDP port (1813) for use by the RADIUS client on switch 10.10.20.30 using a virtual router interface of VR-Default for both management and network login: configure radius-accounting primary server radius1 client-ip 10.10.20.30 vr vr-Default The following command configures RADIUS accounting for network login on host netlog1 using the default UDP port for use by the RADIUS client on switch 10.10.20.31 using the default virtual router interface: configure radius-accounting netlogin primary server netlog1 client-ip 10.10.20.31 configure radius-accounting shared-secret configure radius-accounting {mgmt-access | netlogin} [primary | secondary] shared-secret {encrypted} Description Configures the authentication string used to communicate with the RADIUS accounting server. Syntax Description mgmt-access netlogin primary secondary encrypted string Specifies the switch management RADIUS accounting server. Specifies the network login RADIUS accounting server. Configures the authentication string for the primary RADIUS accounting server. Configures the authentication string for the secondary RADIUS accounting server. Indicates that the string is already encrypted. The string to be used for authentication. 580 | Chapter 15. Security Commands