Netgear XCM8806 Chassis Hardware Installation Guide - Page 39

NETGEAR 8800 Chassis Switch CLI Manual Description Disables the NETGEAR 8800 feature that completes a command automatically with the spacebar. If you disable this feature, you can still use the TAB key for auto-completion. Syntax Description This command has no arguments or variables. Default Disabled. Usage Guidelines None. Example The following command disables using the spacebar to automatically complete a command: disable cli space-completion disable clipaging disable clipaging Description Disables pausing at the end of each show screen. Syntax Description This command has no arguments or variables. Default Enabled. Usage Guidelines The command line interface (CLI) is designed for use in a VT100 environment. Most show command output will pause when the display reaches the end of a page. This command disables the pause mechanism and allows the display to print continuously to the screen. CLI paging is only active on a per-shell session basis. In other words, when you enable or disable CLI paging from within the current configuration, it only affects that session. For new or existing sessions, paging is enabled by default. This setting cannot be saved. To view the status of CLI paging on the switch, use the show management command. The show management command displays information about the switch including the enable/disable state for CLI paging. Chapter 2. Commands for Accessing the Switch | 39