Netgear XCM8806 Chassis Hardware Installation Guide - Page 367
Displaying Detailed Module Recovery Information
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 367 highlights
NETGEAR 8800 Chassis Switch CLI Manual Note: If you configure one or more slots for shut down and the switch detects a hardware fault on one of those slots, all of the configured slots enter the shutdown state and remain in that state until explicitly cleared. If you configure the module recovery setting to none, the output displays an "e" flag that indicates no corrective actions will occur for the specified MSM/MM or I/O module. The "e" flag appears only if you configure the module recovery setting to none. The following sample output displays the module recovery action. In this example, notice the flags identified for slot 10: Slots Type Configured State Ports Flags Slot-1 XCM88P XCM88P Operational 48 MB S Slot-2 XCM8824F XCM8824F Operational 24 MB S Slot-3 XCM8848T XCM8848T Operational 48 MB S Slot-4 Empty 0 Slot-5 XCM8808X XCM8808X Operational 8 MB S Slot-6 XCM8808X XCM8808X Operational 8 MB S Slot-7 Empty 0 Slot-8 XCM8848T XCM8848T Operational 48 MB S Slot-9 XCM8848T Operational 48 MB S Slot-10 XCM8848T XCM8848T Operational 48 MB S E MSM-A XCM88S1 Operational 0 S MSM-B XCM88S1 Operational 0 S Flags : M - Backplane link to Master MSM is Active B - Backplane link to Backup MSM is also Active D - Slot Disabled, S - Slot Secured I - Insufficient Power (refer to "show power budget") e - Errors on slot will be ignored (no corrective action initiated) E - Errors on slot will disable all ports on slot Displaying Detailed Module Recovery Information To display the module recovery setting for a specific port on a module, including the current recovery mode, use the following command: show slot In addition to the information displayed with show slot, this command displays the module recovery setting configured on the slot. The following truncated output displays the module recovery setting (displayed as Recovery Mode) for the specified slot: Slot-6 information: State: Download %: Operational 100 Chapter 8. Commands for Status Monitoring and Statistics | 367