Netgear XCM8806 Chassis Hardware Installation Guide - Page 721
enable netlogin redirect- enable netlogin session-refresh
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 721 highlights
NETGEAR 8800 Chassis Switch CLI Manual enable netlogin redirect-page enable netlogin redirect-page Description Enables the network login redirect page function. Syntax Description This command has no arguments or variables. Default Enabled. Usage Guidelines This command enables the network login redirect page so that the client is sent to the redirect page rather than the original page. enable netlogin session-refresh enable netlogin session-refresh {} Description Enables network login session refresh. Syntax Description refresh_minutes Specifies the session refresh time for network login in minutes. Default Enabled, with a value of three minutes for session refresh. Usage Guidelines Network login sessions can refresh themselves after a configured timeout. After the user has been logged in successfully, a logout window opens which can be used to close the connection by clicking on the Logout link. Any abnormal closing of this window is detected on the switch and the user is logged out after a time interval as configured for session refresh. The session refresh is enabled and set to three minutes by default. The value can range from 1 to 255 minutes. When you configure the network login session refresh for the logout window, ensure that the FDB aging timer is greater than the network login session refresh timer. This command applies only to the web-based authentication mode of network login. Chapter 16. Network Login Commands | 721