Netgear XCM8806 Chassis Hardware Installation Guide - Page 265
The type of module installed in the slot
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
NETGEAR 8800 Chassis Switch CLI Manual Example The following is sample output from this command: (debug) BD-8810.1 # show sharing health-check Member Agg Admin Track Track Group Port Mbr State IP Addr TCP Port Miss Freq State Dn Up 2:8 2:1* Y En 30.1.1.1 23 3 3 Up 0 1 2:2* Y En 30.1.1.2 23 3 3 Up 0 1 2:3* Y En 30.1.1.3 23 3 3 Up 0 1 2:8* - En 30.1.1.8 80 3 10 Down 0 0 2:11* Y - - - - - - - - 2:12* - En 44.1.3.2 80 3 4 Down 0 0 2:16 - En 30.1.1.16 80 3 10 Dis 0 0 2:20 2:20* Y En 192.1.1.1 80 10 3 Up 0 1 2:21* Y En 192.1.1.2 80 10 3 Up 0 1 Member Port Flags: (*)Active, (!) Disabled show slot show slot { {detail} | detail } Description Displays the slot-specific information. Syntax Description slot detail Specifies a slot on the switch. Specifies detailed port information. Default N/A. Usage Guidelines The show slot command displays the following information: • The slot number • The type of module installed in the slot • The type of module configured for the slot • The state of the module, whether the power is down, if the module is operational, if a diagnostic being run, if there is a mismatch between the slot configuration and the module in the slot Chapter 5. Commands for Configuring Slots and Ports on a Switch | 265