Netgear XCM8806 Chassis Hardware Installation Guide - Page 170

NETGEAR 8800 Chassis Switch CLI Manual name slot Specifies the name of the process to terminate and restart. You can use this command with the following processes: • bgp • exsshd • lldp • netLogin • netTools • ospf • snmpSubagent • snmpMaster • telnetd • thttpd • tftpd • vrrp • xmld Specifies the MSM/MM where the process should be terminated and restarted. A specifies the MSM/MM installed in slot A, and B specifies the MSM/MM installed in slot B. Default N/A. Usage Guidelines Use this command to terminate and restart a process during a software upgrade on the switch. You have the following options: • cname-Specifies that the software terminates and restarts all instances of the process associated with a specific routing protocol on all VRs. • name-Specifies the name of the process. Depending on the software version running on your switch and the type of switch you have, you can terminate and restart different or additional processes. To see which processes you can restart during a software upgrade, enter restart process followed by TAB. The switch displays a list of available processes. You can also use the restart process command when upgrading a software modular package. For more information, see the section "Upgrading a Modular Software Package" in Appendix B of the NETGEAR 8800 User Manual. Example The following command stops and restarts the process tftpd during a software upgrade: restart process tftpd The following command stops and restarts all instances of the OSPF routing protocol for all VRs during a software upgrade: restart process class ospf 170 | Chapter 4. Commands for Managing the NETGEAR 8800 Software