Netgear XCM8806 Chassis Hardware Installation Guide - Page 714
disable netlogin ports, Network login is disabled by default.
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 714 highlights
NETGEAR 8800 Chassis Switch CLI Manual Usage Guidelines This command controls the logout window pop-up on the web-based network client. This command applies only to the web-based authentication mode of network login. When disabled, the logout window pop-up will no longer appear. However, if session refresh is enabled, the login session will be terminated after the session refresh timeout. Example The following command disables network login logout-privilege: disable netlogin logout-privilege disable netlogin ports disable netlogin ports [{dot1x} {mac} {web-based}] Description Disables network login on a specified port for a particular method. Syntax Description ports dot1x mac web-based Specifies the ports for which network login should be disabled. Specifies 802.1x authentication. Specifies MAC-based authentication. Specifies web-based authentication. Default Network login is disabled by default. Usage Guidelines Network login must be disabled on a port before you can delete a VLAN that contains that port. This command applies to the MAC-based, web-based, and 802.1x mode of network login. To control which authentication mode is used by network login, use the following commands: enable netlogin [{dot1x} {mac} {web-based}] disable netlogin [{dot1x} {mac} {web-based}] Example The following command disables dot1x and web-based network login on port 2:9: disable netlogin ports 2:9 dot1x web-based 714 | Chapter 16. Network Login Commands