Netgear XCM8806 Chassis Hardware Installation Guide - Page 959
disable rip aggregation, disable rip export
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 959 highlights
NETGEAR 8800 Chassis Switch CLI Manual • Slow convergence • Routing decisions based on hop count; no concept of link costs or delay • Flat networks; no concept of areas or boundaries Example The following command disables RIP for the whole router: disable rip disable rip aggregation disable rip aggregation Description Disables the RIP aggregation of subnet information on a RIP version 2 (RIPv2) router. Syntax Description This command has no arguments or variables. Default RIP aggregation is disabled by default. Usage Guidelines The disable RIP aggregation command disables the RIP aggregation of subnet information on a switch configured to send RIPv2-compatible traffic. The switch summarizes subnet routes to the nearest class network route. The following rules apply when using RIP aggregation: • Within a class boundary, no routes are aggregated. • If aggregation is disabled, subnet routes are never aggregated, even when crossing a class boundary. Example The following command disables RIP aggregation on the interface: disable rip aggregation disable rip export disable rip export [bgp | direct | e-bgp | i-bgp | ospf | ospf-extern1 | ospf-extern2 | ospf-inter | ospf-intra | static | isis ] Description Disables RIP from redistributing routes from other routing protocols. Chapter 21. RIP Commands | 959