Netgear XCM8806 Chassis Hardware Installation Guide - Page 416

NETGEAR 8800 Chassis Switch CLI Manual Depending on the model of your switch and the software running on your switch, different version information may be displayed. Note: The information displayed does not include the I/O version number on the NETGEAR 8800 series switch. The I/O version number includes the major, minor, and I/O version number, not the patch and build numbers. If you use the process option, you will see the following information about the processes running on the switch: • Card-The location (MSM/MM) where the process is running on the switch. • Process Name-The name of the process. • Version-The version number of the process. • BuiltBy-The name of the software build manager. • Link Date-The date the executable was linked. Example The following command displays the hardware and software versions currently running on the switch: show version The following is sample output from a NETGEAR 8806 switch (the output from the NETGEAR 8810 is similar): (Demo)*XCM8806.9#show version Chassis ESN Number : 1102G-00001 Chassis Slot-1 Slot-2 Slot-3 Slot-4 Slot-5 Slot-6 MSM-A MSM-B PSUCTRL-1 PSUCTRL-2 PSU-1 PSU-2 PSU-3 PSU-4 : 800418-00 1102G-00001 Rev 0.0 : 800423-00 00000000000 Rev 0.0 BootROM: 1.0.4.0 : : 800426-00 00000000000 Rev 0.0 BootROM: 1.0.4.0 : : 800229-00-05 1027G-00178 Rev 5.0 BootROM: 1.0.4.0 : 800421-00 00000000000 Rev 0.0 BootROM: 1.0.4.0 : 800420-00 00000000000 Rev 0.0 BootROM: 1.0.4.4 : : 450352-00 1107G-0002 Rev 0.0 BootROM: 2.18 : 450352-00 1107G-0002 Rev 0.0 BootROM: 2.18 : PS 2336 4300-00145 1049J-00188 Rev 11.0 : PS 2336 4300-00145 1049J-00177 Rev 11.0 : PS 2336 4300-00145 1049J-00176 Rev 11.0 : IMG: 12.4.4.0 IMG: 12.4.4.0 IMG: 12.4.4.0 IMG: 12.4.4.0 IMG: 12.4.4.0 416 | Chapter 8. Commands for Status Monitoring and Statistics